Multiple Alarms on a Single Tag

Tags can have multiple alarms configured, each with unique setpoints and other configurations. The number of alarms that you can configure is virtually unlimited and will never exceed the bounds of reasonable design consideration. Adding additional alarms is just as easy as adding the first: simply click on the green plus sign + and start configuring the new alarm. This way separate alarms can monitor different setpoints, so Tags can have alarms for high and low setpoints.

Bindings

Many alarm properties are bind-able, which means they can be bound to other Tags in the system, or expressions. For example, you might bind the enabled property to another Tag which represents whether or not your process is running, thereby disabling the alarm when production is stopped. Or, you might bind the setpoint of an alarm to a Tag that operators can manipulate, thereby letting the setpoint be changed at runtime.

To bind an alarm property, simply click on the binding icon , and the binding UI will slide in from the right. From here you can select the binding type (No Binding, Tag, Expression, or UDT Parameter, if applicable). Note that the expression can reference many useful values such as the Tag's value and other settings of the alarm. When you've configured the binding to your liking, click on the "Back" link at the top of the screen.

Associated Data

Alarms can be configured with custom data, known as Associated Data. These values can be static, driven by another tag, or evaluated with an expression. Associated Data can be viewed in real-time, and is recorded in the Alarm Journal system.

Alarming on Individual Bits

Additionally, alarms can become active by bit state. A common practice for PLC programming is to store alarm conditions as series of bits inside the PLC and expose them to the world as an integer value. Each bit is essentially a binary value. A series of 8 bits, for example, could be represented as an 8-bit integer. This integer value can be monitored by Ignition's OPC-UA server as an integer value as a Tag. This Tag can then have as many alarms as the integer has bits by monitoring the integer's bit state. Using the Bit Position Mode, multiple alarms in Ignition can be configured to monitor the state of each bit.

The following table shows binary and decimal equivalents:

In this case the Tag would be an integer with a value of 142. This Tag would have eight alarms. Each one of these alarms become active in accordance with its Boolean value.

To create the alarms on an integer Tag value

1. Edit the Tag that has an integer value.

2. Create an alarm by selecting the Alarming tab and clicking the green plus sign + to add an alarm.

3. Complete the appropriate properties, for example, enter the Name of the alarm.

4. From the Mode section drop-down, select Bit State and enter a value for the Bit Position.

5. Repeat the same process for the remainder of the bits.

Mode Reference

A list of all available Modes can be found on the Alarm Properties and Event Reference page.